uPVC Pipe Uses: Where It Saves Money Over CPVC, and Where It Must Not Go



Quick answer
uPVC is for cold water: the line from the sump or borewell pump up to the overhead tank, the tank's inlet and overflow, cold mains, and garden and terrace taps. On those lines it saves ₹16.83 a metre over CPVC in 1/2 inch, ₹26.50 in 3/4 inch and ₹44.27 in 1 inch at our prices on 15 November 2026. It must never carry hot water: its makers rate it to 45°C.
Using CPVC for every pipe in the house is safe and simple, and many builders do exactly that. But a good part of a house's pipe never sees hot water, and on that part uPVC does the same job for less.
Where uPVC belongs
- Pump delivery line from the sump or borewell to the overhead tank. This is usually the longest single run in the house and the largest diameter.
- Tank inlet, overflow and drain.
- Cold water mains from the tank down to the floors, where the hot lines run separately.
- Garden, car-wash and terrace taps.
- Cold utility lines in workshops and factories.
Where it must not go
- Any line from a geyser or solar heater, and the last stretch of cold inlet to them. See which pipe for a geyser.
- A mixed line that carries hot water at any time, such as the pipe after a mixer.
The temperature and pressure figures behind this are set out in CPVC vs uPVC.
The saving per metre
CPVC is sold in 5 metre lengths and uPVC in 6 metre lengths, so compare per metre. Our prices at Viveknagar on 15 November 2026, before GST; list prices are in the linked product pages and the Ashirvad uPVC price list.
| Per metre | 1/2 inch | 3/4 inch | 1 inch |
|---|---|---|---|
| Ashirvad CPVC SDR 11 | ₹65.00 | ₹87.00 | ₹134.60 |
| Ashirvad uPVC SCH 40 | ₹48.17 | ₹60.50 | ₹90.33 |
| Ashirvad uPVC SCH 80 | ₹61.83 | ₹77.33 | ₹117.67 |
| Saving, SCH 40 against CPVC | ₹16.83 | ₹26.50 | ₹44.27 |
| Full length | Our price | List price |
|---|---|---|
| ₹289 | ₹555 | |
| ₹363 | ₹698 | |
| ₹542 | ₹1,043 | |
| ₹464 | ₹893 | |
| ₹706 | ₹1,358 |
A worked example. A house with 30 metres of 1 inch pump and tank line and 30 metres of 3/4 inch cold main saves 30 × ₹44.27 plus 30 × ₹26.50, which is ₹2,123.10 before GST, by using uPVC SCH 40 on those runs instead of CPVC. Your lengths will differ; the arithmetic is the same.
From our shop
Products in this guide
Live dealer prices. Add to cart, or ask for a GST quote on the whole list.



Schedule 40 or Schedule 80
Both have the same outside diameter. Schedule 80 has the thicker wall and the higher pressure rating, and it is the one to use where the pipe is exposed, where threads are cut into it, or on the pump delivery side. Schedule 40 is enough for gravity lines from the tank.
Two things to get right
The cement. uPVC takes uPVC cement, the blue, clear or grey tin, not the yellow CPVC one. See which solvent cement for which pipe.
The join to CPVC. A 3/4 inch uPVC pipe and a 3/4 inch CPVC pipe are different outside diameters, so a CPVC fitting will not go on a uPVC pipe. Where the cold uPVC main meets CPVC in the bathroom, use the part made for it, such as the 3/4 inch converter bushing at ₹15 (list ₹29). Sizes are tabulated in the CPVC and uPVC size chart.
Questions we get asked
Is uPVC safe for drinking water?
Yes. Ashirvad's uPVC plumbing pipe is printed "lead free" and is made for potable cold water.
Is uPVC the same as PVC?
In plumbing, uPVC means the white Schedule 40 and 80 pressure pipe for water supply. The grey PVC sold for drainage is SWR pipe, and agricultural PVC is a different range again; see PVC pressure classes.
Can uPVC be used on a terrace in the sun?
It is used there widely. Any plastic pipe in direct sun should be clipped at close intervals and is better shaded or painted; follow the maker's installation guide.
Sources
- Ashirvad Aqualife uPVC product page: schedules and markings.
- Astral Aquarius uPVC catalogue: service temperature.
