How to Clean a Grease Trap: A Routine for Restaurant Kitchens

Farooq··3 min read·2 views
Four steps to clean a grease trap: skim the oil, lift the solids, check and refill, bag and log

Quick answer

Clean a grease trap before the floating oil and the settled food together fill about a quarter of its depth. In a busy restaurant that means skimming every few days and a full clean-out at least monthly. Lift the cover, skim off the oil, scoop out the solids, check the baffles and the flow control, refill with cold water, and bag the waste for disposal. Never flush it with boiling water or drain cleaner.

How often

The common rule is the 25 per cent rule: clean before grease and solids take up a quarter of the trap's liquid depth, because past that point the oil starts to leave with the water. How fast that happens depends on the menu and the trap's size. A small trap under a fryer-heavy kitchen's sink may need skimming daily; a large in-ground interceptor may go a month or more between full clean-outs. Start by checking it every few days for the first month, note how deep the oil gets, and set your schedule from that.

The Ashirvad interceptors hold 18.4 kg, 33.6 kg and 55.3 kg of grease in the 0.94, 1.6 and 3.2 L/s sizes, which gives a feel for how long each can run.

The routine

Four steps to clean a grease trap
The four steps. Diagram: AR Trading Company
  1. Skim the oil. Lift the cover (the Ashirvad units have latches and a gasket) and scoop off the floating layer with a skimmer or a perforated ladle into a bucket.
  2. Lift the solids. Scoop out the food waste settled at the bottom. On larger interceptors this is done by a pump-out service with a suction tanker.
  3. Check and refill. Make sure the baffles are seated and the flow control device and vent are clear, scrape any build-up off the walls, then refill with cold water up to the outlet so the trap separates from the first wash.
  4. Bag it, log it. Close the cover, put the grease and solids out in sealed bags or drums for the waste collector, and write the date and the depth you found in a log, so the schedule is set by what you see.

Where the oil goes

Not into another drain, a storm drain or a vacant plot. Used cooking oil goes to an authorised collector; under FSSAI's RUCO (Repurpose Used Cooking Oil) scheme, registered collectors take it for biodiesel. The trap waste goes out with your dry waste or through the pump-out service.

From our shop

Products in this guide

Live dealer prices. Add to cart, or ask for a GST quote on the whole list.

Browse all cpvc fittings
CPVC Elbow 90° SOC
Astral

CPVC Elbow 90° SOC

In stock · same-day Bengaluru

₹24.00

per piece + GST

Get Quote
CPVC Pipe SDR-13.5 (5 Meter)
Astral

CPVC Pipe SDR-13.5 (5 Meter)

In stock · same-day Bengaluru

₹490.00

per piece + GST

Get Quote
CPVC Elbow 90°
Supreme

CPVC Elbow 90°

In stock · same-day Bengaluru

₹27.60

per piece + GST

Get Quote
CPVC Pipe SDR-13.5
Supreme

CPVC Pipe SDR-13.5

In stock · same-day Bengaluru

₹546.00

per piece + GST

Get Quote
✓ GST invoice✓ Same-day delivery in Bengaluru✓ Authorised dealer prices

Mistakes that undo the trap

  • Boiling water or degreaser down the sink. It melts the grease, carries it through the trap and lets it set again further down the sewer, where it is the board's problem and then yours.
  • Drain cleaner and caustic. Same effect: the grease is moved, not removed.
  • Enzyme or "bacteria" dosing as a substitute for cleaning. These break grease into smaller droplets that pass through; some water utilities ban them for that reason.
  • A food-waste grinder upstream. It fills the trap with solids in days.
  • Running it past full. A full trap is a pipe, not a trap.

Fill it slower

  • Scrape plates and kadais into the bin before washing.
  • Pour used oil into a container, never into the sink.
  • Fit sink strainers so rice and peels stay out.
  • Wipe greasy pans with paper before they go into the wash.

Questions kitchens ask

Why does my grease trap smell?

Usually because it is overdue: rotting food solids and old grease. Clean it, then check that the cover gasket is seated and the vent is clear.

Can I clean it myself?

A small or medium trap, yes, with gloves and a skimmer, following the steps above. Large in-ground interceptors are usually emptied by a pump-out service.

My trap is too small and fills every day. What now?

Replace it with the next size up. Our guide to grease trap size calculation shows how to check, and we supply Ashirvad grease interceptors in 0.94, 1.6 and 3.2 L/s.

Share:WhatsApp

AR Trading Company

Need pipes for this project?

GST-inclusive quote in 2 minutes. Same-day delivery in Bengaluru.

Talk to a person instead?

Leave your number and we'll call you back within business hours (Mon–Sat, 9am–6:30pm).

Free, no obligation. We don't share your number.

Call
WhatsApp
Quote